Detroit Diesel Diagnostic Link (DDDL 8.21 ) Professional 2025 -ALL Grayed Parameters Enabled ! ALL Level 10 !!

Package Include :

DDDL v8.21 is for 2007 & newer engines (DDEC VI & newer)
DDDL v6.5 is for 2006 & older engines.

Detroit Diesel Diagnostic Link (DDDL) 8.20 Professional Engineering version- can be used on DDEC VI and newer systems:

 • View information about the connected ECUs;
 • Perform standard fault code operations;
 • Perform traditional and advanced troubleshooting;
 • Read variable values in real time and display them graphically;
 • Configure and manage parameters;
 • Perform service routines;
 • Play back logs of all connected activity;
 • Program the CPC/MCM (EPA07) and CPC02T/MCM2/ACM2 (EPA10)

ECUs Supported:
EPA07 – DD15, DD13, DD16, S60, MBE900, MBE4000
EPA10 – DD13, DD15, DD16
GHG14 – DD13, DD15, DD16, DT12 Transmission
Freightliner Cascadia
Western Star 5700XE


DiagnosticLink 8.0x Features:
Vehicle ECU software compatibility checking
Vehicle ECU Instrumentation and I/O control troubleshooting panels
Vehicle ECU Identification and Fault Code display
Display detected equipment in a user interface
New I/O control view reduces the number of tabs shown
The new display of Program Device settings
New VIM Throttle Panel for testing GHG14

(DDDL 8.21) Engineering Level Special Features : 

  ALL MCM and CPC Programming Is Enabled !

– No external programs needed.
– Everything works very fast.
– DDL 6.5 Activate
– MBE Activate
– DRS Activate

New Service Routines :
– ABS – Valve Activation (NGC)
– Accumulated Fuel Mass Sync (MY17)
– Detroit Diesel Clutch Control (MY13)
– Detroit Assurance Radar Alignment (Stationary)
– Detroit Assurance Radar Alignment (Stationary)(NGC)
– Detroit Transmission Dyno Mode (NGC)
– DTNA Production MPC1 Calibration (NGC)
– DTNA Production MPC1 Calibration with Target (NGC)
– DTNA Production Progressive Shift Enable
– DTNA Production Progressive Shift Enable (NGC)
– DTNA Production Reset Fault Memory Manager (MY13)
– DTNA SCR ADS Self Check (MY13)
– EGR Erase Bank Current (MDEG)
– EGR Hysteresis Measurement
– EGR Lambda Sensor Replacement (MY16)
– EGR Valve Position Control
– EGR Valve Replacement (MY16)
– Engine Idle Shutdown (NGC)
– ESC Learn Procedure
– Fuel System Integrity Check (MY17)
– Fuel System Integrity Check (NGC)
– HC Doser (NGC)
– HVAC Front Stepper Motor Calibration (NGC)
– HVAC Rear Stepper Motor Calibration (NGC)
– Quantity Control Valve Reset FMU (MDEG)
– Radar Alignment (EOL)
– Rating (NGC)
– Set CPC Odometer (NGC)
– Set ICUC Odometer (NGC)
– TCM Clutch Overload Monitoring
– VCP (MDEG)
– Voltages (MDEG)
– Voltages SCR DPF (MDEG)

New Instruments 
– Air Leak check (NGC)
– Antilock Braking System (NGC)
– Auto Traction Control Electronic Stability (NGC)
– Cruise Control (NGC)
– Data Stream (J1939)
– Detroit Assurance (NGC)
– Engine Brake (MDEG)
– Engine Brake (NGC)
– Hill Start Aid (NGC)
– Lane Departure Warning (NGC)
– M2C2 Smart Switch Configuration
– P3 Cruise Control v54
– Switches (NGC)
– Transmission (NGC)

New InputOutputControl
– Door Locks Windows (NGC)
– Electric Horn (NGC)
– Entrance Lighting (NGC)
– Mirror Heat and Adjustment (NGC)

New Parameters Panel
– Initialize CTP (NGC)

– Can Import Export Parameters
– Can Import Export Accumulators
– Can Access Freightliner ReferenceLinks
– Can Access Service ProLink
– Can Register DRS
– Can Register DDL
– Can Register MBE
– Can Roll Call And Monitor
– Can Troubleshoot VehicleFaults
– Can Export Panel Logic
– Can Display Busload
– Can Override Panel Preconditions
– Can Filter View By AccessLevel
– Can Reprogram Edex Units
– Can Reprogram Depot Units
– Can Override Configuration By Part Number
– Can Access Data Mining Information
– Can Set Data Mining Tag
– Can List By Message
– Can Manipulate Device Responses
– Can Extract Selection To Log File
– Can Select Parameter Export AccessLevel
– Can View Separated Preset Settings
– Can View Instrument UpdateRate
– Can Reset Fault Memory Manager
– Can Override Save Upload Content

release covers the support for:

• New Cascadia Vehicle SOP Launch(includes support for power train ECUs and support for most of the vehicle ECUs)

• Support for GHG17 Medium Duty (MD) production software release:

• MCM21T – M9.1.2.3

• ACM21T – E9.57.0.0

• CPC04T – R36_00_000a



Support for GHG17 Heavy Duty (HD) production software release:

• MCM21T – M6.5.0.2

• ACM21T – E7.57.2.0

• CPC04T – R38_00_000a

• CPC302T – R27.53.00 (New Cascadia)

• TCM01T – NAMT117700

• BHM( Bulk Head Module)Programming and Feature/Parameterization client side support

• Basic support for theCTP01T (FOTA) ECU



Features Highlights of Diagnostic Link 8.13

• Implemented over 200 changes (includes enhancement/improvements, bug fixes, features and panel support for the New Cascadia and MY17 ECU Software release);

• Included support for new instrumentation, troubleshooting, service routines, and I/O control panels for the New Cascadia (i.e. CPC302T, SSAM02T, VRDU02T, RDF02T, HVAC, ICUC01T, and MPC01T)in the tool;

• Some of the additional panels include the I/O control panel for Door modules, CGW04T – GVC.

Parameter compare panel, Instrumentation and Service routine basic troubleshooting panels for ABS02T and Parameter tabs for CPC302T;

• BHM programming and feature configuration parameter panels are supported;

• FSIC panels for MDEG and MY17 software versions are supported;

• Help file support for both the New Cascadia and M2/C2 panels are included;

• Panels support for EURO4 EPA07 Retrofit Vehicles;

• Panel to support the CTP VIN Initialization.

* Perform Standard Fault Code Operations;

* Links to Traditional and Advanced Troubleshooting Information;

* Read Actual Values;

* Perform Service Routines;

* Playback Logs of All Connected Activity.

Troubleshooting Guides (English Language): 

• DDC-SVC-MAN-0084: (EPA07/10/GHG14 DDEC VI/10 Electronics and Troubleshooting Manual) – 2020 
• DDC-SVC-MAN-0191: (GHG17 Heavy Duty Troubleshooting Manual) – 2020 
• DDC-SVC-MAN-0193: (GHG17 DD5 Medium Duty Troubleshooting Manual) – 2020 
  
• DDC-SVC-MAN-0184: (EUROIV DDEC VI/10 Electronics and Troubleshooting Manual) – 2020 
  
• DDC-SVC-MAN-0140: (Detroit Transmissions Manual) – 2020 
• DDC-SVC-MAN-0015: (EPA07 MBE 900 DDEC VI Troubleshooting Manual) – 2020 
• DDC-SVC-MAN-0010: (EPA07 MBE 4000 DDEC VI Troubleshooting Manual) – 2020 
• DDC-SVC-MAN-0009: (EPA07 Series 60 DDEC VI Troubleshooting Manual) – 2020 
• DDC-SVC-MAN-0000: (Electrical Wiring Schematics) – 2020
  New Cascadia Electrical Systems and Troubleshooting Manual – 2020 
• Cascadia Troubleshooting Manual – 2020 

We Are Offering Full Teamviewer Support , We will Connect To your Pc And Install The Software For you !

Product Details :

Region: All regions
Type: Diagnostic software
Language:English,Spanish,French,Italian,Russian,German,Denish,Polish,Finnish,
Dutch,Norwegian,Portuguese,Japanese,Swedish,Turkish,Hungarian,Korea
OS: Windows7 ,Windows 10, Windows 11